 |
| AUTOMATIC SPIKE SYSTEM |
A Road spike system, the road spike system used for various application like consoling traffic on road with help
of vehicle density sensor also used in BRT for avoiding the entering non permitted vehicles used for security in
industries and in one way road .In that the spike which can be fixed on shaft who receive power from DC
stepper motor .A motor which control by microcontroller and microcontroller r commanded by sensor. The
system with spring operated used for one way road. This system ensures to obey traffic rules properly and
reduces accident.
A Road spike system is used for various applications like traffic controlling according to vehicle density present
on road, for BRT to avoiding non permitted vehicle entering, on one way road, security system. According to
WHO the traffic accident is about 1.25 million annually .This system helps to reducing the accident and people
obey the traffic rule properly.
In modern world, vehicle user increases largely. As the vehicle count increases the traffic also gets rises. By this
effect, we can see a lot of road accidents. To rescue the victims, several problems have to be faced by the
ambulance because of traffic problems. The main objective of this system is to stop the vehicle at signal and
also restrict the vehicle which is entering in to the BRT road. This system can be used in the retractable spikes
before the zebra crossing that comes out when the traffic signal is red and goes off when the traffic signal turns
to green. This is an innovative idea mainly to avoid congestion and rescue the ambulance. In the usual traffic
system the peoples were not following the traffic rules properly. To overcome this problem we were using this
system. The main aim of this system is to obey the traffic rules properly if not there will be an opening of
spikes. It will make all the people to obey the traffic rules correctly.
In cities, there is separate transportation road for BRT Bus for time consumption & controlling the traffic. But
some time other vehicles also use the BRT road. So to avoid them we use some mechanical instrument which
can restrict the. The major objective of this system is to provide a safety secured system for our society this .On
using the spikes module, the spikes system operates using DC motor. In case ambulance reaches signal the
spikes will gets OFF and other signals gets ON with an emergency alert. This system provides a secured system
for our society. No other way of breaking the traffic rule.
The system will analyze the traffic at four way junction and adjust green light intervals for variable densities of
traffic. E.g. If at a traffic signal number of vehicles coming from north & south is too much and that of coming
from the east & west is very little, the green light interval for north & southbound traffic will be longer and that
for east & westbound traffic will be shorter. The system will be comprised of sensors and a microcontroller.
Sensors will be fitted at appropriate positions at the four way junction. The sensors will measure the density and
will communicate the same to a microcontroller. Microcontroller will use these to adjust timing intervals of
green lights.
We also would implement a feature to ensure integrity of traffic rules at the signal. A spike strip will be
introduced at the front of each lane before the zebra crossing. The spike strip will be engaged once the signal
goes red. Once the strip is engaged, if any, vehicle tries to cross the strip; the vehicle tire would get punctured.
Once the light goes green the spike strips will be disengaged and vehicles could move freely.
Comments
Post a Comment